TrackAD

Airworthiness directives › 2020-07-10

AD 2020-07-10 Airworthiness Directives; Airbus SAS Airplanes

2020-04-22
2020-04-07
39-19889
FAA-2020-0213
Airframe
—

Models named: A320-271N, A321-271N, -271NX, -272N. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to Airbus SAS Model A320-271N airplanes and Model A321-271N, -271NX, and -272N airplanes, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2020-0053, dated March 10, 2020 (“EASA AD 2020-0053”).

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2020-0053.

Unsafe condition

This AD was prompted by a report of a gap found on an engine pylon nose fire seal during an inspection of an in-production airplane. The FAA is issuing this AD to address a potential gap in the engine pylon nose fire seal, which, if not detected and corrected, could lead to loss of firewall integrity and, in case of an engine fire, could prevent the ability to extinguish the fire.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1