Airworthiness directives › 2020-22-16
AD 2020-22-16 Airworthiness Directives; Airbus SAS Airplanes
Models named: A318-111, -112, -121, -122, A319-111, -113, -114, -115, -131, -132. Read the applicability below — it usually turns on serial or part numbers too.
Applicability*9
This AD applies to the Airbus SAS airplanes specified in paragraphs (c)(1) through (4) of this AD, certificated in any category, with an original airworthiness certificate or original export certificate of airworthiness issued on or before January 17, 2020. (1) Model A318-111, -112, -121, and -122 airplanes. (2) Model A319-111, -112, -113, -114, -115, -131, -132, -133, -151N, and -153N airplanes. (3) Model A320-211, -212, -214, -216, -231, -232, -233, -251N, -252N, -253N, -271N, -272N, and -273N airplanes. (4) Model A321-111, -112, -131, -211, -212, -213, -231, -232, -251N, -252N, -253N, -271N, -272N, -251NX, -252NX, -253NX, -271NX, and -272NX airplanes.
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
This paragraph restates the requirements of paragraph (g) of AD 2019-03-17, with no changes. For airplanes with an original airworthiness certificate or original export certificate of airworthiness issued on or before June 13, 2018: Within 90 days after April 3, 2019 (the effective date of AD 2019-03-17), revise the existing maintenance or inspection program, as applicable, to incorporate the information specified in Airbus A318/A319/A320/A321 Airworthiness Limitations Section (ALS) Part 3, Certification Maintenance Requirements (CMR), Revision 06, dated June 13, 2018. The initial compliance time for accomplishing the tasks specified in Airbus A318/A319/A320/A321 Airworthiness Limitations Section (ALS) Part 3, Certification Maintenance Requirements (CMR), Revision 06, dated June 13, 2018, is at the applicable time specified in Airbus A318/A319/A320/A321 ALS Part 3, Certification Maintenance Requirements (CMR), Revision 06, dated June 13, 2018, or within 90 days after April 3, 2019, whichever occurs later. Accomplishing the maintenance or inspection program revision required by paragraph (i) of this AD terminates the requirements of this paragraph.
Unsafe condition
This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address a safety-significant latent failure (that is not annunciated), which, in combination with one or more other specific failures or events, could result in a hazardous or catastrophic failure condition.
Affected ADs
This AD replaces AD 2017-25-04, Amendment 39-19118 (82 FR 58098, December 11, 2017) (“AD 2017-25-04”); and AD 2019-03-17, Amendment 39-19569 (84 FR 6315, February 27, 2019) (“AD 2019-03-17”).
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1