TrackAD

Airworthiness directives › 2020-24-12

AD 2020-24-12 Airworthiness Directives; Airbus SAS Airplanes

Superseded. This directive was replaced by AD 2023-25-15. Work to the current one.
2021-01-05
2020-12-01
—
—
Airframe
2023-25-15

Models named: A350-941. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to Airbus SAS Model A350-941 airplanes, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2020-0123, dated May 29, 2020 (“EASA AD 2020-0123”).

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2020-0123.

Unsafe condition

This AD was prompted by reports that certain central wing box (CWB) fasteners had rotated inside the fastener holes due to insufficient friction for the application. The FAA is issuing this AD to address CWB fastener rotation. This condition, if not corrected, could lead to cracking of the fastener head sealant cover, followed by fuel vapor leakage inside the cabin, possibly resulting in injury to airplane occupants.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1