Airworthiness directives › 2020-25-10
AD 2020-25-10 Airworthiness Directives; General Electric Company Turbofan Engines
Applicability*9
(1) This AD applies to all General Electric Company (GE) GEnx-1B64/P2, GEnx-1B67/P2, GEnx-1B70/75/P2, GEnx-1B70/P2, GEnx-1B70C/P2, GEnx-1B74/75/P2, GEnx-1B76/P2, and GEnx-1B76A/P2 model turbofan engines that have a high-pressure turbine (HPT) rotor stage 2 disk, part number (P/N) 2383M86P02, and a serial number (S/N) listed in paragraph 4, Appendix—A, Table 1, Table 2, or Table 3, of GE GEnx-1B Service Bulletin (SB) 72-0463 R01, dated January 6, 2020, installed. (2) This AD applies to all GE GEnx-2B67/P model turbofan engines that have a HPT rotor stage 2 disk, P/N 2383M86P02, and a S/N listed in paragraph 4, Appendix—A, Table 1, Table 2, or Table 3, of GE GEnx-2B SB 72-0402 R01, dated January 8, 2020, installed.
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
(1) For affected GE GEnx-1B engines, at the next engine shop visit after the effective date of this AD, or before the HPT rotor stage 2 disk has accumulated 6,500 cycles since new (CSN), whichever occurs first, perform an immersion ultrasonic inspection (USI) of the HPT rotor stage 2 disk using paragraph 3.B.(1) of GE GEnx-1B SB 72-0463 R01, dated January 6, 2020. (2) If, during the USI required by paragraph (g)(1) of this AD, a rejectable indication is found, before further flight, remove the HPT rotor stage 2 disk from service and replace it with a part eligible for installation. (3) For affected GE GEnx-2B engines, at the next engine shop visit after the effective date of this AD, or before the HPT rotor stage 2 disk has accumulated 6,500 CSN, whichever occurs first, perform an immersion USI of the HPT rotor stage 2 disk using paragraph 3.B.(1) of GE GEnx-2B SB 72-0402 R01, dated January 8, 2020. (4) If, during the USI required by paragraph (g)(3) of this AD, a rejectable indication is found, before further flight, remove the HPT rotor stage 2 disk from service and replace it with a part eligible for installation.
Unsafe condition
This AD was prompted by a report of the potential for undetected subsurface anomalies formed during the manufacturing process that could result in uncontained failure of the HPT rotor stage 2 disk. The FAA is issuing this AD to prevent failure of the HPT rotor stage 2 disk. The unsafe condition, if not addressed, could result in uncontained HPT rotor stage 2 disk release, damage to the engine, and damage to the airplane.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1