Airworthiness directives › 2021-14-11
AD 2021-14-11 Airworthiness Directives; General Electric Company Turbofan Engines
Applicability*9
This AD applies to General Electric Company (GE) CF6-80A, CF6-80A1, CF6-80A2, CF6-80A3, CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6-80C2A5, CF6-80C2A5F, CF6-80C2A8, CF6-80C2B1, CF6-80C2B1F, CF6-80C2B1F1, CF6-80C2B1F2, CF6-80C2B2, CF6-80C2B2F, CF6-80C2B3F, CF6-80C2B4, CF6-80C2B4F, CF6-80C2B5F, CF6-80C2B6, CF6-80C2B6F, CF6-80C2B6FA, CF6-80C2B7F, CF6-80C2B8F, CF6-80C2D1F, CF6-80C2K1F, and CF6-80C2L1F model turbofan engines with an installed thermal shield having one of the following part numbers: 2787M85P01, 9315M41P09, 9315M41P13, 9315M41P14, 9315M41P15, 9315M41P16, 9315M41P20, 9348M13P01, 9367M63P01, 9367M63P02, 9367M63P03, 9367M63P04, 9367M63P05, 9367M63P06, 9367M63P07, or 9315M41P20.
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
(1) After the effective date of this AD, at every piece-part exposure of the HPT rotor stage 1 disk, HPT rotor stage 2 disk, or the HPT thermal shield, perform a visual inspection and a fluorescent penetrant inspection of the HPT thermal shield. (2) During any inspection required by paragraph (g)(1) of this AD, if a crack extending through either the forward or aft flange of the HPT thermal shield is detected, remove the HPT thermal shield, the HPT rotor stage 1 disk, and the HPT rotor stage 2 disk from service.
Unsafe condition
This AD was prompted by an inspection by the manufacturer that revealed cracking of the high-pressure turbine (HPT) rotor stage 1 disk, caused by initial flange-to-flange cracking on the HPT thermal shield between the HPT rotor stage 1 disk and the HPT rotor stage 2 disk. The FAA is issuing this AD to prevent failure of the HPT rotor stage 1 disk and the HPT rotor stage 2 disk. The unsafe condition, if not addressed, could result in uncontained release of the HPT rotor stage 1 and stage 2 disks, damage to the engine, and damage to the airplane.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1