Airworthiness directives › 2021-16-08
AD 2021-16-08 Airworthiness Directives; CFM International, S.A. Turbofan Engines
Applicability*9
This AD applies to: (1) CFM International, S.A. (CFM) CFM56-5B1, -5B2, -5B4, -5B5, -5B6, -5B7, -5B1/P, -5B2/P, -5B3/P, -5B4/P, -5B5/P, -5B6/P, -5B7/P, -5B8/P, -5B9/P, -5B3/P1, -5B4/P1, -5B1/2P, -5B2/2P, -5B3/2P, -5B4/2P, -5B6/2P, -5B9/2P, -5B3/2P1, -5B4/2P1, -7B20, -7B22, -7B24, -7B26, -7B27, -7B22/B1, -7B24/B1, -7B26/B1, -7B26/B2, -7B27/B1, -7B27/B3, -7B20/2, -7B22/2, -7B24/2, -7B26/2, -7B27/2, -7B27A model turbofan engines with a: (i) Rotating air high-pressure turbine (HPT) front seal: (A) With part number (P/N) 1795M36P01 or P/N 1795M36P02 and serial numbers (S/Ns) GWNDN949 through GWNSE969 or S/Ns GWN000CE through GWN0990L, not including S/Ns GWN08ND7, GWN0923A, GWN0971E, GWN098A1, GWN098W6, GWN098W8, GWN098WA, and GWN0990G, installed, and (B) That has been removed from the original HPT disk and re-assembled to a different HPT disk. (ii) [Reserved] (2) CFM CFM56-5C2, -5C2/4, -5C2/F, -5C2/F4, -5C2/G, -5C2/G4, -5C2/P, -5C3/F, -5C3/F4, -5C3/G, -5C3/G4, -5C3/P, -5C4, -5C4/1, -5C4/P, -5C4/1P model turbofan engines with a: (i) Rotating air HPT front seal: (A) With P/N 1795M36P01 or P/N 1795M36P02 and S/Ns GWNDN949 through GWNSE969 or S/Ns GWN000CE through GWN0990L, not including S/Ns GWN08ND7, GWN0923A, GWN0971E, GWN098A1, GWN098W6, GWN098W8, GWN098WA, and GWN0990G, installed, and (B) That has been removed from the original HPT disk and re-assembled to a different HPT disk. (ii) [Reserved]
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
(1) For all affected CFM CFM56-5B and CFM56-7B model turbofan engines: (i) If, on July 5, 2019 (the effective date of AD 2019-12-05), the rotating air HPT front seal has 7,000 cycles or greater since being reconfigured, remove the part from service within 50 cycles after July 5, 2019 (the effective date of AD 2019-12-05), or before further flight, whichever occurs later, and replace with a part eligible for installation. (ii) If, on July 5, 2019 (the effective date of AD 2019-12-05), the rotating air HPT front seal has between 6,001 and 6,999 cycles, inclusive, since being reconfigured, remove the part from service within 500 cycles after July 5, 2019 (the effective date of AD 2019-12-05), but not to exceed 7,050 cycles since being reconfigured, or before further flight, whichever occurs later, and replace with a part eligible for installation. (iii) For all remaining CFM56-5B and CFM56-7B model turbofan engines, remove the rotating air HPT front seal from service before accumulating 6,500 cycles since being reconfigured, or within 50 cycles after the effective date of this AD, whichever occurs later. (2) For all affected CFM CFM56-5C model turbofan engines: (i) If, on July 5, 2019 (the effective date of AD 2019-12-05), the rotating air HPT front seal has 4,250 cycles or greater since being reconfigured, remove the part from service within 25 cycles after July 5, 2019 (the effective date of AD 2019-12-05), within 1,500 cycles since the last fluorescent penetrant inspection (FPI) of the rotating air HPT front seal, or before further flight after the effective date of this AD, whichever occurs later, and replace with a part eligible for installation. (ii) If, on July 5, 2019 (the effective date of AD 2019-12-05), the rotating air HPT front seal has between 3,751 and 4,249 cycles, inclusive, since being reconfigured, remove the part from service within 250 cycles after July 5, 2019 (the effective date of AD 2019-12-05), before accumulating 4,275 cycles since being reconfigured, within 1,500 cycles since the last FPI of the rotating air HPT front seal, or before further flight after the effective date of this AD, whichever occurs later, and replace with a part eligible for installation. (iii) For all remaining CFM CFM56-5C model turbofan engines, remove the rotating air HPT front seal from service before accumulating 4,000 cycles since being reconfigured, or within 50 cycles after the effective date of this AD, whichever occurs later. (3) For CFM56-5B or CFM56-7B model turbofan engines with an affected rotating air HPT front seal that has been operated in a CFM56-5C model turbofan engine since being reconfigured, remove the rotating air HPT front seal from service using the cycle limits in paragraph (g)(2) of this AD.
Unsafe condition
This AD was prompted by cracks found in the rotating air HPT front seal. The FAA is issuing this AD to prevent failure of the rotating air HPT front seal. The unsafe condition, if not addressed, could result in the uncontained release of the rotating air HPT front seal, damage to the engine, and damage to the airplane.
Affected ADs
This AD replaces AD 2019-12-05, Amendment 39-19660 (84 FR 28717, June 20, 2019).
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1