TrackAD

Airworthiness directives › 2022-08-01

AD 2022-08-01 Airworthiness Directives; Airbus Helicopters

2022-05-17
2022-04-12
—
—
Airframe
—

Models named: AS332C, AS332C1, AS332L, AS332L1. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to all Airbus Helicopters Model AS332C, AS332C1, AS332L, and AS332L1 helicopters, certificated in any category.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Affected parts are attachment screws and fitting(s) fastening the parts identified in paragraphs (g)(1) and (2) of this AD. (1) Rear MGB suspension bars, right and left sides, to the fuselage. (2) Front MGB suspension bar to the fuselage.

Unsafe condition

This AD was prompted by reports of corrosion on attachment screws and fittings fastening the main gearbox (MGB) suspension bars to the fuselage. The FAA is issuing this AD to address corrosion on attachment fittings and attachment screws for the MGB suspension bars. The unsafe condition, if not addressed, could lead to structural failure of the MGB attachment screws, resulting in detachment of MGB suspension bars from the fuselage and subsequent loss of control of the helicopter.

Affected ADs

This AD replaces AD 2020-22-01, Amendment 39-21297 (85 FR 69126, November 2, 2020) (AD 2020-22-01).

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1