TrackAD

Airworthiness directives › 2022-14-07

AD 2022-14-07 Airworthiness Directives; Bombardier, Inc., Airplanes

2022-08-19
2022-07-15
—
—
Airframe
—

Models named: BD-700-1A10, BD-700-1A11. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to all Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes, certificated in any category.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

An affected part is a passenger oxygen box assembly having a dual manifold assembly having part number 100-009-39 and a lot and serial number specified in figure 1 to paragraph (g) of this AD. ER15JY22.014

Unsafe condition

This AD was prompted by reports that some passenger oxygen box dual manifold had their piston ejected during the mask deployment test due to a non-conformity in manufacturing. The FAA is issuing this AD to address a possible in-service piston ejection when used for emergency descent, smoke, or fire that may result in a high rate of oxygen leakage, which could prematurely deplete the oxygen for all passengers.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1