TrackAD

Airworthiness directives › 2022-19-10

AD 2022-19-10 Airworthiness Directives; Airbus SAS Airplanes

2022-10-19
2022-10-04
—
—
Airframe
—

Models named: A321-251N, A321-251NX, A321-252NX, A321-253N, A321-253NX, A321-271NX. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to Airbus SAS Model A321-251N, A321-251NX, A321-252NX, A321-253N, A321-253NX, and A321-271NX airplanes, certificated in any category, as identified in European Union Aviation Safety Agency (EASA) AD 2021-0263, dated November 19, 2021 (EASA AD 2021-0263).

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, EASA AD 2021-0263.

Unsafe condition

This AD was prompted by a determination that the quick release pin that is installed on the upper attachment of certain Smart HS-L41 and Smart HS-L42 lavatories is too short to lock on the bracket. The FAA is issuing this AD to address the possibility that the quick release pin can slip out unintentionally under certain load conditions, which could lead to consequent movement of the lavatory, possibly resulting in injuries to flight attendants or passengers.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1