TrackAD

Airworthiness directives › 2023-05-16

AD 2023-05-16 Airworthiness Directives; Continental Aerospace Technologies, Inc., Reciprocating Engines

2023-03-15
2023-03-15
—
—
Engine
—

Makes named: continental. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to Continental Aerospace Technologies, Inc. (Continental) GTSIO-520-C, -D, -H, -K, -L, -M, -N, and -S; IO-360-A, -AB, -AF, -C, -CB, -D, -DB, -E, -ES, -G, -GB, -H, -HB, -J, -JB, -K, and -KB; IO-470-A, -C, -D, -E, -F, -G, -H, -J, -K, -L, -LO, -M, -N, -P, -R, -S, -T, -U, -V, and -VO; IO-520-A, -B, -BA, -BB, -C, -CB, -D, -E, -F, -J, -K, -L, -M, and -MB; IO-550-A, -B, -C, -D, -E, -F, -G, -L, -N, -P, and -R; LTSIO-360-E, -EB, -KB, and -RB; LTSIO-520-AE; O-470-A, -B, -E, -G, -H, -J, -K, -L, -M, -N, -R, -S, -T, and -U; TSIO-360-A, -AB, -B, -BB, -C, -CB, -D, -DB, -E, -EB, -F, -FB, -G, -GB, -H, -HB, -JB, -KB, -LB, -MB, -RB, and -SB; TSIO-520-A, -AE, -AF, -B, -BB, -BE, -C, -CE, -D, -DB, -E, -EB, -G, -H, -J, -JB, -K, -KB, -L, -LB, -M, -NB, -P, -R, -T, -UB, -VB, and -WB; TSIO-550-A, -B, -C, -E, -G, -K, and -N; TSIOF-550-K; and TSIOL-550-A, -B, and -C model reciprocating engines.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

For affected engines with an installed crankshaft assembly identified in paragraphs (g)(1) or (2) of this AD, before further flight, do the actions identified in, and in accordance with paragraph III, Action Required, of Continental Mandatory Service Bulletin MSB23-01, Revision A, dated February 16, 2023 (MSB23-01A). (1) Crankshaft assembly having a crankshaft serial number listed in Appendix 1 of MSB23-01A; or (2) Crankshaft assembly that was repaired or installed on or after June 1, 2021, having a part number and crankshaft serial number listed in Appendix 2 of MSB23-01A.

Unsafe condition

This AD was prompted by a report of a quality escape involving improper installation of counterweight retaining rings in the counterweight groove during manufacture. The FAA is issuing this AD to prevent departure of counterweight and retaining hardware from the crankshaft assembly. The unsafe condition, if not addressed, could result in loss of engine oil pressure, catastrophic engine damage, engine seizure, and consequent loss of the aircraft.

Affected ADs

This AD replaces AD 2023-04-08, Amendment 39-22355 (88 FR 11383, February 23, 2023).

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1