Airworthiness directives › 2025-11-08
AD 2025-11-08 Airworthiness Directives; Airbus SAS Airplanes
Models named: A350-941. Read the applicability below — it usually turns on serial or part numbers too.
Applicability*9
This AD applies to all Airbus SAS Model A350-941 airplanes, certificated in any category.
Compliance
Comply with this AD within the compliance times specified, unless already done.
Required actions
Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency (EASA) AD 2024-0156, dated August 13, 2024 (EASA AD 2024-0156).
Unsafe condition
This AD was prompted by an inspection that found several anodic burns on the main landing gear (MLG) bogie beam axles following a high velocity oxygen-fuel stripping process. The FAA is issuing this AD to address the anodic burns on the MLG bogie beam axles. The unsafe condition, if not addressed, could lead to structural failure of the MLG and consequent collapse, possibly resulting in damage to the airplane and injury to the occupants.
Affected ADs
None.
Read the original on the Federal Register →
You just looked this one up by hand
TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.
- Bring your existing list in from a spreadsheet Paste the rows straight out of Excel. Headers like C/W Date and N/A are read for you.
- A copy that works when this does not One file. No internet, no login, no this software running. For the morning something has to be produced and the computer is not cooperating.
- $5 a month, or $50 a year Up to 50 aircraft on either.
Look round a real shop first Start free
The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.
The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1