TrackAD

Airworthiness directives › 2025-17-12

AD 2025-17-12 Airworthiness Directives; Bombardier, Inc., Airplanes

Superseded. This directive was replaced by AD 2026-14-09. Work to the current one.
2025-10-31
2025-09-26
—
—
Airframe
2026-14-09

Applicability*9

This AD applies to the Bombardier, Inc., airplanes identified in paragraphs (c)(1) and (2) of this AD, certificated in any category. (1) All Model CL-600-1A11 (600), CL-600-2A12 (601), and CL-600-2B16 (601-3A and 601-3R Variants) airplanes. (2) Model CL-600-2B16 (604 Variant) airplanes, serial numbers 6050 through 6192 inclusive.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

(1) Within 90 days after the effective date of this AD, revise the existing maintenance or inspection program, as applicable, to incorporate the information specified in the applicable time limits/maintenance checks (TLMC) document identified in table 1 to paragraph (g)(1) of this AD. The initial compliance time for doing the tasks is at the time specified in the applicable TLMC document identified in table 1 to paragraph (g)(1) of this AD, or within 90 days after the effective date of this AD, whichever occurs later, except as provided by paragraph (h) of this AD. BILLING CODE 4910-13-P ER26SE25.000 Table 1 to Paragraph (g)(1)—TLMC Documents ER26SE25.001 Table 2 to paragraph (g)(2)—Temporary Revisions ER26SE25.002 (2) Within 90 days after the effective date of this AD, revise the existing maintenance or inspection program, as applicable, to incorporate the information specified in the applicable temporary revisions (TRs) identified in table 2 to paragraph (g)(2) of this AD. The initial compliance time for doing the tasks is at the time specified in the applicable TR identified in table 2 to paragraph (g)(2) of this AD, or within 90 days after the effective date of this AD, whichever occurs later. ER26SE25.003 BILLING CODE 4910-13-C Note 1 to table 2 to paragraph (g)(2): The asterisk (or “one star”) with the last three digits of the task numbers listed in table 2 to paragraph (g)(2) of this AD indicates that the task is an airworthiness limitation task.

Unsafe condition

This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. The FAA is issuing this AD to address new or more restrictive limitations. Failure to comply with these new or more restrictive limitations could adversely affect the continued airworthiness of the airplane.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1