TrackAD

Airworthiness directives › 2026-07-12

AD 2026-07-12 Airworthiness Directives; Airbus Helicopters

2026-04-29
2026-04-14
—
—
Airframe
—

Models named: AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350D. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to all Airbus Helicopters Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, and AS350D helicopters, certificated in any category, that were delivered before January 1, 2026. Note 1 to paragraph (c): Helicopters with AS350B3e designation are Model AS350B3 helicopters.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as specified in paragraph (h) of this AD: Comply with all required actions and compliance times specified in, and in accordance with European Union Aviation Safety Agency (EASA) AD 2026-0021, dated January 29, 2026 (EASA AD 2026-0021).

Unsafe condition

This AD was prompted by a report of a gap between the bolted assemblies under the attachment fittings of the main gearbox (MGB) suspension bars. The FAA is issuing this AD to prevent structural failure of the MGB attachment screws. The unsafe condition, if not addressed, could result in detachment of the MGB suspension bars with consequent loss of control of the helicopter.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1