TrackAD

Airworthiness directives › 2026-20-08

AD 2026-20-08 Airworthiness Directives; Airbus Helicopters

2026-11-05
2026-10-01
—
—
Airframe
—

Models named: AS355E, AS355F, AS355F1, AS355F2, AS355N. Read the applicability below — it usually turns on serial or part numbers too.

Applicability*9

This AD applies to all Airbus Helicopters Model AS355E, AS355F, AS355F1, AS355F2, and AS355N helicopters, certificated in any category.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Except as specified in paragraphs (h) and (i) of this AD: Comply with all required actions and compliance times specified in, and in accordance with, European Union Aviation Safety Agency AD 2024-0127, dated July 3, 2024 (EASA AD 2024-0127).

Unsafe condition

This AD was prompted by the determination that the tail rotor drive fan wheel and impeller second stage have been incorrectly identified during production. The FAA is issuing this AD to detect and address incorrect identification of the affected parts. The unsafe condition, if not addressed, may cause the loss of traceability of the affected parts, which could lead to undetected fatigue failure of the affected parts and result in loss of control of the helicopter.

Affected ADs

None.

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1