TrackAD

Airworthiness directives › 2019-01-05

AD 2019-01-05 Airworthiness Directives; Airbus SAS Airplanes

Superseded. This directive was replaced by AD 2019-20-13. Work to the current one.
2019-03-22
2019-02-15
39-19544
FAA-2018-0788
Airframe
2019-20-13

Applicability*9

This AD applies to Airbus SAS Model A330-201, A330-202, A330-203, A330-223, A330-243, A330-223F, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, and A330-343 airplanes, certificated in any category, with an original certificate of airworthiness or original export certificate of airworthiness issued on or before September 18, 2017.

Compliance

Comply with this AD within the compliance times specified, unless already done.

Required actions

Within 90 days after the effective date of this AD, revise the existing maintenance or inspection program, as applicable, by incorporating Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Revision 06, dated September 18, 2017; or Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Variation 6.1, dated January 16, 2018. The initial compliance times for the actions specified in Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Revision 06, dated September 18, 2017, or the actions specified in Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Variation 6.1, dated January 16, 2018, are within the applicable compliance times specified in Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Revision 06, dated September 18, 2017, or Airbus A330 Airworthiness Limitations Section (ALS) Part 4, System Equipment Maintenance Requirements (SEMR), Variation 6.1, dated January 16, 2018; or within 90 days after the effective date of this AD; whichever occurs later; except as required by paragraph (h) of this AD.

Unsafe condition

This AD was prompted by a revision of the airworthiness limitations section (ALS), which provides new and more restrictive maintenance requirements and airworthiness limitations for airplane structures and systems. We are issuing this AD to prevent reduced airplane control due to the failure of system components.

Affected ADs

This AD affects AD 2017-05-10, Amendment 39-18821 (82 FR 13379, March 13, 2017) (“AD 2017-05-10”).

Read the original on the Federal Register →

You just looked this one up by hand

TrackAD holds all 12,278 of them and matches them against the aircraft you actually look after — airframe, engine, propeller and appliances in one pass — then works out what falls due and when.

Look round a real shop first Start free

The demonstration shop is eleven real aircraft with a year of work behind them. No account needed.

The directive text above is reproduced from the Federal Register, a work of the United States government and in the public domain. The separation into applicability, compliance and required actions is TrackAD's.*1